Address3644 Rocky River Drive, Cleveland, Ohio
Call us216-308-5651

Our ProductionsTaper BushesOur Productions

CATEGORIES

https://www.kys.com.tr/wp-content/uploads/2021/03/fb2.jpg

As KYS PowerTransmission Parts, we have adopted the basic principle of strong cooperation with customers and business partners and providing high level service.

Call Us
+90 332 342 10 64
Address
Buyuk Kayacik Mahallesi K.O.S.B. Kuddusi Caddesi
No:13 Selçuklu - Konya - Turkey

Taper Bushes

Taper Bushes > Zodiac Signs

https://www.kys.com.tr/wp-content/uploads/2021/03/burclu-sistemler.jpg

Taper Bushes

Tapered bushings are simple but effective mechanical devices designed to mount power transmission hubs on shafts, used in power transmission systems in various industries. These devices are structures that can adapt to different shaft diameters and can be fixed on the shaft without requiring special tools. Taper bushings are easily replaceable and removable for ease of maintenance and repair. Manufactured in different sizes, taper bushings are used to align or lock fasteners such as pulleys, gears and couplings to the drive shaft. They are considered one of the most convenient and cost-effective solutions in power transmission systems.

According to their dimensions, tapered bushings allow the pulley or gear systems to be used in motion transmission elements with different shaft diameters to be installed on the shaft without runout and in series. Manufactured in standard wedge sizes tapered bushingr. Gearing or pulleys also saves laborious operations such as keyway cutting for through-hole machining.

Characteristics of Taper Bushes

There is a conical slot suitable for the bushing in the hub of the elements. The bushing is placed in this slot and inserted into the shaft by hand as slippery. If the set screws are inserted into the tightening holes and tightened, they are assembled in the press with a tight fit. When we remove the setstures and insert one into the disassembly hole and tighten it, the shaft and the element are separated.

Advantages of Tapered Bushings;

1. Installation is very easy and quick as the splined shaft is slidably mounted by hand.
2. When the setsture screws are tightened, it does not wear the shaft because it fixes the element to the shaft and does not cut the wedge because there is no load on the wedge.
3. The element does not wear out as no hammer is used during assembly.
4. When we remove the setstures for disassembly, insert them into the disassembly place and tighten them, the element is separated from the shaft. Disassembly is very easy as we can remove the discharged element by hand.

Places where Conical Bushings are used;

1. V-belt pulleys
2. Poly-v belt pulleys
3. Couplings
4. Voryatorier
5. Sprockets
6. Timing gears
7. Flanges
8. All elements to be connected to the splined shaft